If your LCD screen or PC is telling you that the ink cartridges are full, however, no ink is passing through to your paper, then it is possible that you are dealing with the issue of a clogged printhead, and you need to unclog your Brother ink cartridge. So, let us talk about some tips regarding how to unclog your Brother ink cartridge without any hassle.
Clogged Brother ink cartridges usually cause skipping areas of inconsistent ink output when there is a need to print something. A fully clogged cartridge of a Brother inkjet printer won’t be able to print at all. This may happen most often when you take out your ink cartridge for some time and expose it to air or even if you don’t use your printer ink cartridge for several months.
You can manually clean your clogged ink cartridge with some store-bought items and can restore that crisp and clean printing you got when you first install your Brother ink cartridge.
The steps to clean the Brother ink cartridge
- Step 1: First, you need to remove the clogged ink cartridge from your printer. You should use the right method for your specific printer model and make, but generally, you need to just open the lid and then lift the ink cartridge out.
- Step 2: Now, you need to locate the print head where the printer ink comes out of the ink cartridge and then wipe off any crusty or dried ink with a clean and soft cloth.
- Step 3: In this step, you should moisten a soft and lint-free cloth with clean water and wipe the area known as the print head clearly. If you are using hard water or are worried about mineral deposits from your tap water, you can use distilled water. If your ink cartridge has a silver, copper, or gold nozzle plate, you should try your best not to get it wet. Just take a wet cotton swab to only clean the print head. This will keep the metal nozzle plate dry.
- Step 4: Next, you need to put your ink cartridge back in the printer and then print a test. If you still can see blank areas or banding, just run the print head cleaner utility software that you have received with your printer. If your print is spotty even after that, soak the cartridge.
- Step 5: Fill a bowl with clean and warm water. The water should be enough to cover your print head. If you have a cartridge that is completely clogged, you can use a 50-50 solution of ammonia and water.
- Step 6: Stand the cartridge in that solution, so the print head is submerged. If your cartridge has a metal plate on the bottom, use the ammonia solution on a cotton swab and clean the print head only.
- Step 7: Soak the cartridge until the water cools down, then dry it with a clean and soft cloth, and reinsert it. You can run a test print to check if the ink is flowing normally again.
So, these are the steps to unclog your Brother ink cartridge and get beautiful and crisp printouts. You can also buy Brother printer online or Brother ink cartridges online.
