Tag Archives: ink cartridges NZ

What to do if your HP all-in-one printer starts malfunctioning?

How to troubleshoot and fix common HP toner cartridge issues such as streaking and smudging?

HP Printer, HP Printer Cartridges, ink cartridges, Printer, toner cartridges, , , , , , , , , , , , , ,

Sometimes the printed photo or document is not of the intended quality. Here, the steps in this blog should help with print quality issues such as streaked or faded printouts, color or black ink that won’t print, documents with fuzzy or blurry text, ink streaks, and other issues. Although the printer is operational, the printed output has ink smears or streaks.

The following are the steps-

First step: Verify your paper

  • Be careful to print on brand-new, wrinkle-free paper.
  • Continually move forward if you are certain you did.

Step two: Launch the utility for cleaning print cartridges.

  • Choose “Setup” from the menu.
  • Choose Tools using the arrow keys, and then click OK.
  • After selecting Clean Print Cartridges, click A test page is printed by the gadget.

Analyze the exam page. Stop reading if the page’s print quality is good. If the print quality is poor, move on to the subsequent cleaning stage.

Activate the Printer Toolbox

Two strategies:

Launch HP Director, then choose Settings, Print Settings, and Printer Toolbox from the menus.

  • Open Printers and Faxes in the Windows Control Panel, then right-click your printer icon and select Properties if the HP Director technique does not work. Next, select Printing Preferences. Choose the Service This Device icon after selecting the Services tab.
  • Open the Printer Toolbox. Click Clean the Print Cartridges under Device Services, then adhere to the on-screen directions. There are a maximum of three cleaning levels available. Recycle or throw away the printed page.

Step three: tidy up the region surrounding the cartridge nozzles

NOTE: If you have streaks or smudges in your printed output and you have already completed all three cleaning levels in the Clean Print Cartridges program, only then should you proceed with the cleaning of the area around the cartridge’s nozzles.

The print cartridges should not be left outside the printer for more than 30 minutes. A cartridge’s ink will dry out if it’s left outside the printer for too long, rendering it useless. Moreover, take care to avoid getting ink on your hands or clothing.

Assemble the cleaning supplies

  • With sterile bottled, distilled, or filtered water. Tap water could include impurities that harm the cartridge.
  • Clean cotton swabs or any other soft, lint-free material that won’t adhere to the cartridges (coffee filters work well).
  • To rest the cartridges while being cleaned, use paper towels or sheets of paper.
  • One of the ink cartridges should be taken out and set down on a piece of paper with the nozzle plate facing up.
  • Check the vicinity of the nozzle plate. Clean the cartridge as directed below if you see any debris or ink buildup:
  • Do not clean the print cartridge if there is no debris or ink buildup.
  • Clean water should be used to lightly saturate the lint-free cleaning material.

Clean the faces and edges surrounding the nozzle plate with the swab. The region that needs to be cleaned will be hazy. If the cleaning agent becomes soiled, replace it.

Replace the problematic cartridge right away if you haven’t already done so to address the issue. To find out if the cartridge is covered by warranty, see Ink Cartridge and Printhead Limited Warranty. Replacement toner cartridges and other accessories are available for the printer’s better operation.

Quick steps to replace a toner cartridge and drum unit in a Brother laser printer

Quick steps to Replace a Toner Cartridge and Drum unit in a Brother Laser Printer

Drum unit, ink cartridges, toner cartridges, , , , , ,

If you’ve never replaced the toner cartridge or drum unit in your Brother printer before, the operation may seem daunting. We’ll show you how to install both for a few common Brother laser printers in this brief guide. It’s much simpler than it appears! The installation process varies significantly depending on the printer and the consumable being replaced, but it is rather simple once you understand how the toner and drum unit work.

A brief overview of Brother toner cartridges and drum units

To make a print, the toner cartridge and drum unit work together. The toner cartridge houses the toner powder, while the drum unit is an electrically charged cylinder that transfers the toner powder to paper to form text and images. The toner cartridge and drum unit are sold separately by Brother.

How to Clean a Toner Cartridge?

  • Remove the new cartridge from its packaging.
  • Take the cartridge out of its package.
  • Remove the orange protection clip from the cartridge’s bottom.
  • Pull the seal tape off the ink cartridges‘ side over a trash container. After removal, the tape should come out in one long strip and can be tossed.
  • You are now ready to install!

How to Prepare Your Drum Set?

  • Unpack the new drum set
  • Take the drum unit out of its package.
  • Remove the orange protective clip that is wrapped around the drum unit.
  • You are now ready to begin installation!

Toner Cartridges TN-433 Replacement

  1. To open the front cover of the printer, press the release button on the front cover.
  2. Hold the drum unit’s green handle and gradually pull it out.
  3. To unlock the toner cartridge, grasp the cartridge’s handle and push it away from you. Pull the toner up and out of the drum unit after it has been unlocked.
  4. To clean the corona wire, slide the green tab from left to right a few times.
  5. Remove the orange protective cover from the new toner cartridge.
  6. Insert the toner cartridge into the drum unit and pull it in until it clicks into place.
  7. Slide the drum unit back into the printer, locking it in place with the green handle.
  8. Remove the machine’s front cover.

How to Change the Drum Unit on a DR-431CL?

  1. To open the front cover of the printer, press the release button on the front cover.
  2. Hold the drum unit’s green handle and gradually pull it out.
  3. Turn the green lock lever (1) counterclockwise until the release position is locked. Lift the front of the drum unit and remove it from the machine while holding the green handles of the drum unit.
  4. Pull the toner up and out of the drum unit after it has been unlocked.
  5. To clean the corona wire, slide the green tab from left to right a few times.
  6. Remove the orange protective cover from the new drum unit.
  7. Insert the toner cartridges into the drum unit and pull it in until it clicks into place.
  8. Slide the drum unit back into the printer, locking it in place with the green handle.
  9. Bring the front cover to a close.
  10. Reset the Drum Counter on the DR-431CL.
  11. Start the printer.

To pick the following, use the up and down arrows:

  • Then, choose [Machine Info.] and click
  • Choose [Parts Life] and click
  • Choose [Drum] and hit
  • Then, for five seconds, press and hold the “OK” button.
  • Select [Reset] by pressing the up arrow.

Toner cartridges are available in regular yield, high yield, and extra high yield yields. High-yield and extremely high-yield cartridges are normally more expensive, but they print more pages for a better overall value.

How To Reset HP Toner For Laser Printers?

How To Reset HP Toner For Laser Printers?

Printer Ink Cartridges, , , , , ,

When you have an HP laser printer, it is good to know the process to reset the toner from time to time. Toner is one of the most important parts of a laser printer because that is what helps you meet your printing requirements. Sometimes, buying a new cartridge can be quite expensive and you might just want to refill the toner. However, if you want to buy printer cartridges, Fab Cartridges can provide you with some great options. They have some of the best printer ink cartridges that you can choose from and get your printer running in no time.

Alternatively, you can also refill the toner. The existing cartridges that you use in your HP laser printer can be refilled and used properly if you reset the toner the right way. The only problem with refilling the cartridges is that your HP printer might still consider it empty until you reset the toner by following the right steps. The process of resetting HP toner is fairly simple and can be completed in around thirty minutes.

Following are the steps that you need to follow to reset your HP toner cartridge for laser printers without any hassle:

Step 1: At the beginning, you need to switch off your printer completely. If the power button is on when you start the reset process, it might not work out.

Step 2: After switching off the printer, press the green button that you will see on the printer and hold it. While doing this, turn your printer on. When you do that, there will be some lights flashing on the screen for a moment, and then, it will be off again. After this, you need to wait for a few seconds. Then, you will see the attention light that will be turned on and will be followed by the light that indicates that it is ready to run. After that, the green light will also switch on. Furthermore, you must press the green button continuously. You need to wait for a few seconds after that, and then, you will see that the ready light, as well as the attention light, will go off immediately.

Step 3: After completing the above step, you must press the green button continuously and also push the toner to rotate the button with force. Again, you will see the flashing lights on the screen when you press the toner button briefly. Finally, release both the green as well as the toner button at the same time.

Step 4: Push the red button or the cancel button repeatedly. Now, you will see that all the working lights will be turned off on your printer.

Step 5: Now, open and then close your HP printer’s lid once. You will see the light beginning to blink.

Step 6: Finally, press the green button, and your reset process of the HP toner cartridge chip will be completed.

Advantages Of Buying A Printer Cartridge
If you do not wish to refill the toner and want to buy a printer cartridge, that is also a great option. While refilling toner cartridges is usually a good idea and offers pretty good results, in some cases, you might end up with wasted toner and paper debris in your toner cartridge which can further result in other problems besides contaminating your refilled cartridge. Hence, it is also a great idea to buy a printer cartridge after you finish the old one.

Moreover, it is noteworthy that, more often than not, it is worth spending a bit of money on getting good quality prints and avoiding the hassle of making a mess while refilling your toner. That being said, if you do decide to refill the toner, make sure you wear gloves during the process and exercise extreme caution around your clothes so that you can get the job done with minimal mess. As an alternative, you can also visit a store and get your toner refilled by professionals. After all, all it takes is a syringe and a bottle of ink.

Wrapping Up
If you are looking for the best ink cartridges in NZ, get in touch with Fab Cartridges. We offer some of the highest quality printer cartridges, toners, and other accessories to ensure that your printer works seamlessly without breaking down on you. Our accessories are designed to make sure that your printer lasts for a long time and you can make the most out of your investment in the long run. We promise quality and cater to the printing needs of all our customers at the most cost-effective prices.

To place an order, visit https://fabcartridges.co.nz today!